Preskoči na sadržaj
← Natrag na Blog
technology

PPWR Technical Documentation (Annex VII): What Packaging Companies Need in Place Now

Regulation (EU) 2025/40 has applied since 12 August 2026. This guide explains what the Annex VII technical documentation must contain, who is responsible for it, how long to keep it and how to close gaps if your files are not ready.

Regulation (EU) 2025/40 on packaging and packaging waste (PPWR) has applied since 12 August 2026 (Article 71). Before placing packaging on the market, the manufacturer must carry out the conformity assessment procedure and draw up the technical documentation described in Annex VII (Article 15(2)). This guide explains what it must contain, who is responsible for it, how long it must be kept and what to do if your files are still incomplete.

Where things stand in October 2026

The PPWR replaced Directive 94/62/EC, which was repealed with effect from 12 August 2026, apart from a few provisions that continue for a transition period (Article 70). The documentation duty is tied to "placing on the market", meaning the first making available of packaging, empty or filled, on the Union market (Article 3). According to the Commission FAQ, packaging placed on the market before 12 August 2026 can stay on the market. Packaging placed on the market from that date needs a technical file and an EU declaration of conformity behind it.

Annex VII asks the manufacturer to show conformity with the requirements of Articles 5 to 12 "that apply to it", and several of those requirements start later (see Table 2). The Commission FAQ confirms that where a provision has no date of its own, the general date of 12 August 2026 applies. A file that is complete today will need new sections as those dates arrive.

Who has to draw up the technical documentation

The duty sits with the manufacturer (Article 15(2)). Under Article 3, that is whoever makes the packaging or packaged product, unless the packaging is designed or made under another company's name or trademark, in which case that company is the manufacturer. Other roles have related duties:

  • Importers must make sure, before placing packaging on the market, that the manufacturer has carried out the conformity assessment and drawn up the Annex VII documentation. They keep a copy of the declaration of conformity and must ensure the documentation can be provided on request (Article 18).
  • Importers and distributors that place packaging on the market under their own name or trademark, or modify it in a way that could affect compliance, are treated as manufacturers and take on all Article 15 obligations (Article 21).
  • Distributors must act with due care and check, among other things, producer registration and labelling before making packaging available (Article 19).
  • Suppliers of packaging or packaging materials must give the manufacturer all the information and documentation needed to demonstrate conformity, including for the technical documentation (Article 16).
  • Authorised representatives may keep the documentation on the manufacturer's behalf, but drawing it up cannot be part of their mandate (Article 17).

The conformity assessment itself can be carried out on the manufacturer's behalf, for example by a laboratory, but legal responsibility stays with the manufacturer. There is also one relief for very small brand owners: where the company that has packaging made under its own name is a micro-enterprise and its packaging supplier is located in the Union, the supplier is considered the manufacturer for the purposes of Article 15 (Article 15(12)).

What Annex VII requires

Article 38 points to Annex VII, which sets out a single procedure: Module A, internal production control. The manufacturer establishes the technical documentation, takes the measures needed so that production matches it, draws up the declaration of conformity and declares on its sole responsibility that the packaging meets the applicable requirements. The procedure has no step for a third-party body, so the quality of your file carries the full weight of proof.

The documentation must make it possible to assess conformity, must specify the applicable requirements and must include "an adequate analysis and assessment of the risks of non-conformity". Wherever applicable, it contains at least the elements in Table 1.

Table 1. Minimum content of the technical documentation (Annex VII, point 2)

ElementWhat to include in practice
(a) General descriptionThe packaging and its intended use
(b) Design and materialsConceptual design, manufacturing drawings and the materials of each component
(c) ExplanationsDescriptions needed to understand the drawings, schemes and operation of the packaging
(d) Standards and specificationsHarmonised standards (Article 36) and common specifications (Article 37) applied in full or in part, other technical specifications used for measurement or calculation, and the solutions adopted where none was applied
(e) AssessmentsA qualitative description of how the assessments under Articles 6, 10 and 11 were carried out
(f) Test reportsThe reports that support your conclusions

On point (d), note that the Commission FAQ treats the old harmonised standards written for Directive 94/62/EC as guidance only. They no longer give a presumption of conformity, except the minimisation standard, which can be used until the end of 2029. Several articles also name evidence that must sit in the same file.

Table 2. Requirement-specific evidence and when it applies

RequirementLegal basis for the evidenceApplies from
Sum of lead, cadmium, mercury and hexavalent chromium not exceeding 100 mg/kg; PFAS limits for food-contact packagingArticle 5(6)12 August 2026
Criteria for packaging to count as reusableArticle 11(3)Already applies
Environmental claims on packaging properties regulated by the PPWRArticle 1412 August 2026
Recyclability (design for recycling, later recycled at scale)Article 6(9)1 January 2030 at the earliest
Minimisation of weight and volume, using the method in Annex IV Part BArticle 10(4)1 January 2030

For minimisation, Article 10(4) and Annex IV are unusually specific. The file must explain the specifications and conditions used, identify for each performance criterion the design requirement that prevents further reduction of weight or volume, and include the test results, studies or modelling relied on. Variations between production batches must be taken into account and documented.

Keeping the file current

Annex VII, point 3 requires the manufacturer to ensure that the manufacturing process and its monitoring keep production in line with the file. Article 15(4) adds that manufacturers need procedures for series production to remain in conformity and must take account of changes in design or characteristics and in the standards or specifications used. Where conformity could be affected, the assessment must be redone. The declaration of conformity must be "continuously updated" (Article 39(2)). Each packaging must also carry a type, batch or serial number or another element that identifies it (Article 15(5)), so a package can be linked to the file version that covered it.

Retention periods and authority requests

Table 3. Retention and access rules

RuleDetailSource
Keep documentation and declaration, single-use packaging5 years from the date the packaging was placed on the marketArticle 15(3), Annex VII point 4
Keep documentation and declaration, reusable packaging10 years from the date the packaging was placed on the marketArticle 15(3), Annex VII point 4
Reply to a reasoned request from a national authorityDocuments available within 10 days of receipt of the requestArticle 15(10), Article 18(8)
Format and languageElectronic form, paper on request, in a language the authority can easily understandArticle 15(10)
Supply chain identificationBe able to name who supplied you, for 5 years (single-use) or 10 years (reusable)Article 22

The 10-day period comes from the regulation itself. If evidence is spread across inboxes and supplier portals, test how long it really takes to assemble one complete file.

Technical documentation and the declaration of conformity

The technical documentation holds the evidence; the EU declaration of conformity is the signed statement that the requirements of Articles 5 to 12 have been demonstrated (Article 39(1)). The declaration follows the model structure in Annex VIII, is drawn up for each packaging type, must identify the packaging it covers and must be in the language or languages required by the Member State where the packaging is placed or made available. By drawing it up, the manufacturer assumes responsibility for compliance (Article 39(4)). Article 15(2) puts the assessment and documentation first and the declaration after compliance has been demonstrated. Our guide to PPWR declaration of conformity requirements covers the Annex VIII fields in detail.

What to do if your files are not ready

Under Article 62, when a Member State finds that the declaration of conformity has not been drawn up, or not correctly, or that the Annex VII documentation is not available, incomplete or contains errors, it must require the economic operator to put an end to the non-compliance. If it persists, the Member State must take measures to prohibit the packaging from being made available or to have it recalled or withdrawn. The Commission FAQ adds that operators should first receive a warning and a chance to correct, and that authorities should support compliance rather than lead with sanctions. Member States must also lay down penalty rules by 12 February 2027 (Article 68). More in our article on PPWR penalties and non-compliance.

A practical recovery plan:

  1. List what you have placed on the market since 12 August 2026. Group it by packaging unit, mark each as single-use or reusable and flag food-contact packaging.
  2. Request supplier evidence in writing. Article 16 obliges suppliers to provide what you need: material composition, heavy metal data and, for food-contact items, PFAS test results. For packaging made before 12 August 2026 whose supplier cannot help, the Commission FAQ expects best efforts, including your own assessments.
  3. Cover what applies today first: Article 5 substance limits, Article 11 criteria if you sell packaging as reusable, and evidence for any regulated environmental claim.
  4. Build each file against Table 1, including the risk analysis, then draw up and sign the declaration of conformity.
  5. Act on real non-conformity. If packaging does not meet an applicable requirement, Article 15(8) requires immediate corrective action and informing the market surveillance authority.
  6. Plan for 2028 and 2030. Follow the delegated and implementing acts and new harmonised standards on labelling, recyclability, recycled content and minimisation. The Commission's packaging waste page links to its guidance.

Keeping a provable record

Retention of 5 or 10 years raises a practical question: if an authority asks in 2029 what your records said in 2026, can you show it? Hoken Pass, digital product passport software for SMEs, publishes product data as digital product passports and puts a qualified eIDAS timestamp from InfoCert on every published version, with a blockchain record on paid plans, so a company can prove what its product records contained and when. It does not generate declarations of conformity, technical documentation or PPWR assessments. You can start on the free plan, and the same setup serves ESPR digital product passports.

Frequently asked questions

What is PPWR Annex VII (Annex 7)? Annex VII of Regulation (EU) 2025/40, also written as PPWR Annex 7, sets out the conformity assessment procedure for packaging, Module A (internal production control), and what the technical documentation must contain.

Does the PPWR technical documentation need a notified body? No. Annex VII sets out Module A, internal production control, under which the manufacturer carries out the assessment and declares conformity on its sole responsibility. A laboratory may carry out the assessment on its behalf, but responsibility stays with the manufacturer.

How long must the technical documentation be kept? For 5 years from the date single-use packaging was placed on the market and 10 years for reusable packaging (Article 15(3)). Importers must keep the declaration of conformity and ensure the documentation can be made available for the same periods (Article 18(7)).

How quickly must I provide it to an authority? Within 10 days of receiving a reasoned request from a national authority, in electronic form, on paper if requested, and in a language the authority can easily understand (Article 15(10) for manufacturers, Article 18(8) for importers).

I import packaged goods. Do I have to draw up the file myself? Normally the manufacturer draws it up, and you must check that it has done so before placing the packaging on the market (Article 18(2)). If you place packaging on the market under your own name or trademark, or modify it in a way that could affect compliance, you are treated as the manufacturer and the obligation becomes yours (Article 21).

Is the file finished once it covers today's requirements? No. Annex VII covers the requirements of Articles 5 to 12 that apply to the packaging, and labelling, recyclability, recycled content and minimisation requirements start from 2028 and 2030 onwards. Article 15(4) also requires reassessment when design or relevant standards change.

Sources